Andrew operation and maintenance Specifications download pdf (Page 32)

Installation Procedures

Step 6

Step 7

Step 8

Recheck subreflector centering and height settings.

Remove and store 206278 lifting tabs. Replace panel seam hardware at lifting tab loca-

tions.

Final Subreflector Settings should be performed with antenna either in operating posi-

tion or a nominal 30° elevation angle.

After you have completed the assembly of your antenna, you are now ready to become

operational. In order to operate the earth station antenna, you will need to direct it to the

desired satellite adjusting both the elevation and azimuth angles appropriately. The fol-

lowing procedures provide details on how to correctly position your antenna on the

desired satellite.

Subreflector Centering

Adjustment Hardware

(3 Places)

Reference Drawing 240272

Figure 22

Threaded Rod

Adjustment Location

(3 Places)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

No comments

Andrew operation and maintenance Specifications Page 32