Andrew operation and maintenance Specifications download pdf (Page 19)

Step 2

Step 3

Installation Procedures

Attach the four 302518 Subreflector Support Brackets at the 15th (outer most) reflector

panel hole position from reflector center on ribs 2, 5, 8, and 11 as shown in Figure 9.

Note: Do not fully tighten subreflector support bracket hardware at this time.

Figure 9

Check reflector panels to ensure seam widths are even and panels are not overlapped

or interfering with each other. If needed gently rock the reflector back and forth to help

even the panel seam gaps.

1/4” Lock Washer

(9974-15)

1/4 x 1-1/4” Socket Head

Capscrew (45055-2)

1/4” Hex Nut

(9999-57)

302518

Subreflector Strut

Support Bracket

Panel

Reference Drawing 240272

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

No comments

Andrew operation and maintenance Specifications Page 19