Step 2
Step 3
15
Installation Procedures
Loosely attach 302511 Ribs to 302648 Short Struts as shown in Figure 4. Note: Do not
fully tighten hardware at this time. Support end of rib until 302509 Long Strut is installed.
Figure 4
Loosely attach 302509 Long Struts to 302648 Short Struts and 302511 Ribs as shown in
Figures 5a and 5b. Do not fully tighten hardware at this time. Note: Observe placement
of 209765-1 1/4” Spacer between the long and short struts.
Figure 5a
302511
Rib
5/8” x 1/2”
Shoulder
Bolt
(9858-36)
302648
Short Strut
302648
Short Strut
302509
Long Strut
5/8” x 3/4”
Shoulder Bolt
(9858-31)
1/4”
Spacer
(209765-1)
1/2”
Hex Nut
(9999-61)
1/2”
Hex Nut
(9999-61)
1/2”
Lock
Washer
(9974-64)
1/2” ID 1”
OD
Flat
Washer
(9997-65)
Note: Temporarily
Support Rib Until
302509 Long
Strut is Installed
1/2” ID 1”
OD
Flat
Washer
(9997-65)
1/2”
Lock
Washer
(9974-64)
Reference Drawing 240272
Reference Drawing 240272
Comments to this Manuals