Andrew operation and maintenance Specifications download pdf (Page 16)

Chapter 2 - Installation

42S315F 2-4

 2. Always wear a hard hat if someone is above you.

2.3.3 General Electrical Safety Summary

These are general electrical safety precautions that are not related to any

specific procedure. These are recommended precautions that personnel must

understand and apply.

 Ensure that all electrical tools and equipment are properly

grounded.

 Avoid shorting circuits when using metal tools. Some circuits

have high current capability which, when shorted, will flash and

may cause burns and/or eye injury.

 Remove all jewelry and exposed metal objects from body and

clothing before performing maintenance, adjustments, and/or

troubleshooting. Before working inside the equipment, remove all

power, unless power is required to perform procedures. Do not

replace parts with power on.

 Replacement of fuses or other parts must be done using identical

types and ratings. Substitution of non-identical parts may cause

safety and fire hazards.

 Servicing this equipment may require working with protective

covers removed and ac power connected. Extreme caution must

be exercised during these procedures.

2.3.4 Resuscitation

Personnel working with or near hazardous chemicals or voltages should be

familiar with modern methods of resuscitation.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

No comments

Andrew operation and maintenance Specifications Page 16