Andrew operation and maintenance Service Manual download pdf (Page 13)

This section provides installation procedures for the 4.0 Meter Andrew Earth Station Antenna.

The installation procedures include instructions on the following antenna components.

• Mount

• Reﬂector

• Back Structure

• Reﬂector To Mount Assembly

• Subreﬂector

• Feed System

Note: All installation instructions for the antenna options are contained in the parts kit included

in the shipment.

Before beginning the installation process on the ground mount assembly, ensure that the

foundation has been prepared. Foundation speciﬁcations are provided by Andrew and may

be used as a reference by civil engineering personnel when preparing the foundation for local

soil conditions. These speciﬁcations are available before the shipment arrives by contacting

the Customer Service Center.

To ensure level, smooth surface for mount, remove excess concrete from shear caps and

anchor bolts as shown in Figure 1.

Installation Procedures

Overview

Foundation Preparation

Remove excess concrete

from shear caps and

anchor bolts as shown.

Figure 1

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

No comments

Andrew operation and maintenance Service Manual Page 13